The Geochemical Data Imaging and Application in Geoscience: Taking the Northern Daxinganling Metallogenic Belt as an Example

Geochemical data were predominantly expressed by vector format, the research on geochemical data visualization, i.e., raster data format, was not paid proper attention. A total of 39 geochemical elements in 1:200,000 regional geochemical exploration data were rasterized to form images, and then a geochemical image database was generated. This article has carried out the study on geochemical imaging within Daxinganling metallogenic belt. The metallogenic belt had once carried out the regional geochemical survey, the sampling density was 1 site/4 km 2 , and 39 geochemistry elements including the microelement and trace element have been analyzed. Quintic polynomial method was used to implement the geochemical data interpolation, and the cell size of formed geochemical elemental image is 1 km. The images of the geochemical elements were processed by image enhancement methods, and then hyperspectral remote sensing data processing method was used for prospecting target selection, lithology mapping, and so on. The interpreted results have been verified in practice. All the abovementioned suggested a good development prospect for the rasterized geochemical images. Finally the author puts forward using rasterize geochemical images in combination with other geological, geophysical, and remote sensing data to make better use of the geochemical data and be more extensively applied in the geoscience.


Introduction
Geochemical data are typically reported as compositions, in the form of such proportions as weight percents, parts per million, etc., subject to a constant sum (e.g., 100%, 1,000,000 ppm). As an important source of geo-information, geochemical data recording multiple element concentration have been successfully processed by advanced multivariate analytical methods (e.g., factor analysis, cluster analysis, etc.) to identify geological bodies and delineate mineralization-favored space [1][2][3][4][5][6]. The results of these geochemical data were mainly expressed by vector format, including the colorful geochemical map.
The raster image application in geology was further improved with the development of remote sensing technology. With respect to the application of remote sensing in geology, several books on the geological structural interpretation were published [7,8]. As the multispectral and hyperspectral imaging rapidly grows, most of the researches paid much attention to the extraction of altered mineral information which were often related to different types of ore deposits [9][10][11][12][13][14][15][16]. These ore deposits include Carlin-type deposit, Archean massive sulfide deposit, skarn-type deposit, and volcanic massive sulfide deposit. Some studies also focused on lithology mapping with hyperspectral tools [17][18][19][20][21][22].
Only little geochemical data was rasterized. It is partly because the rastering process is more complex, and also the formed raster image could not produce good visual effect due to the low sample density. It is worth mentioning that the geochemical data with vector format can provide relatively simple results; thus the rasterized image appears superfluous. A small amount of research focused on geochemical data rasterization. A technique of metal content on maps was developed [23]. Utilizing ALKEMIA software, Gustavsson et al. [24] designed an interpolation and smoothing method to generate maps including dot maps, color maps, and shaded relief maps.
In this study, geochemical data of the northern Daxinganling metallogenic belt were taken as the experiment area.
A geochemical survey with the scale of 1:200,000 was conducted in a large area of the Daxinganling region [6]. In follow-up to that research, the objectives of the present study are to evaluate the rasterization method of geochemical data obtained from the northern Daxinganling region, use rasterized geochemical data to assist in geological mapping and prospecting target selection, and propose an application of rasterized geochemical data.

Experimental area
The northern Daxinganling metallogenic belt was chosen as an experimental area. The Daxinganling metallogenic belt generally refers to an area including the main ridge of the Daxinganling Mountains and both of its east and west slopes.

Geological background
The Daxinganling region generally refers to an area that includes the main ridge of the Daxinganling Mountains and the eastern and western slopes of the ridge (Figure 1). The region is located between the Siberian and North China plates [26,27]. Several of its tectonic units had been divided (Figure 1). In this region, the Proterozoic strata are comprised of epicontinental detritus from volcanic eruptions and carbonate sedimentary formations. The strata constitute the Precambrian crystalline basement [26]. The cap rock is composed of the Paleozoic group, including the Ordovician, Silurian, Devonian, and Carboniferous series, which are sets of epicontinental clastic rock, specifically carbonate rocks interlayered with rock from volcanic eruptions and sedimentary formations. The Mesozoic, Jurassic, and Cretaceous series are primarily comprised of rock from nonmarine volcanic eruptions and sedimentary formations. An important area of concentrated mineralization exists in the western region of the Hulunhu-Eerguna fault (fault ① in Figure 1). In this area, many deposits exist [28]. The mineralization is mainly subvolcanic-hydrothermal-type deposit and porphyry deposit. The porphyry deposit is predominantly comprised  [25]

Geochemical data rasterizing method
The remote sensing software can be used for the point rastering; most of the data processing and interpretation can be accomplished. In this study, the whole process was completed through using the ENVI software (V. 4.4, Research System Inc., Boulder, CO, USA).

Conversion of data format
The geochemical data obtained from the Daxinganling Mountains were stored in Microsoft XLS format, and 39 elements (oxide) data was included. The arrangement of single elements' data is based on the seriation of the first letters and then followed by oxide. The whole arrangement order is as follows: Ag, As, Au, B, Ba, Be, Bi, Cd, Co, Cr, Cu, F, Hg, La, Li, Mn, Mo, Nb, Ni, P, Pb, Sb, Sn, Sr, Th, Ti, U, V, W, Y, Zn, Zr, Al 2 O 3 , CaO, Fe 2 O 3 , K 2 O, MgO, Na 2 O, and SiO 2. The oxides content were expressed in percentage; the unit of Au and Ag value is ppb. The units of other content values all were ppm. The geographic position was expressed in the format of geographic coordinates.
The file needs to be checked in the sorting way, to inspect whether unqualified data exists. The unqualified data site must be eliminated to ensure quality of the data. Because ENVI cannot directly recognize the file with Microsoft XLS format, the XLS files need to be transformed into TXT format. The latitude and longitude of coordinates were assigned at the first two columns respectively; the other elements were listed afterwards. In Microsoft Excel, the file was saved as TXT format. Additionally, it needs to be noted that if the data content of the geochemical exploration sampling sites is too large even exceeding the permission of Microsoft Excel software, then respectively they need to be else saved in other software, e.g., software Surfer 8 (Golden Software Inc., Golden, USA), to obtain the format that can be recognized by ENVI software. The latter case is suitable for the aeromagnetic data, in which data volume is enormous and usually exceeds the row range of Microsoft Excel software.

Rasterizing geochemical data
The geochemical data are rasterized by pull-down menu "Rasterize point data" in the ENVI software. The output projection was determined, and output X/Y size was selected as 1000 m, meaning the spatial resolution of the formed rasterized images is 1000 m. Linear interpolation (quintic polynomial) was chosen. Smooth quintic Position of the elements measured by 1:2,000,000 regional geochemical survey in the periodic table, with shaded area as measured elements.

5
The Geochemical Data Imaging and Application in Geoscience: Taking the Northern… DOI: http://dx.doi.org /10.5772/intechopen.84725 polynomial interpolation is performed by giving binary interpolation of Z values and smooth surface fitting at points that are irregularly distributed on the X-Y plane. The interpolation function is a fifth-degree polynomial in X and Y in a triangular cell and each polynomial is determined by the given values of Z and estimated values of partial derivatives at the vertexes of the triangle [32]. After the above steps, the image of a single element can be formed. And in the same way, the images of 39 elements can be created.
The sampling sites were irregular and the rasterized image covered a whole area in a rectangle in the process of rasterizing geochemical data (Figure 3). These inappropriate image contents can be eliminated by using the method of masking. To mask the incorrect area, the buffer zones of sampling site were used.
The formation of the buffer zone is that the geochemical sampling sites were overlaid by the ROI (region of interest) sites. The overlaid 5231 sampling sites were shown in Figure 4. By contrast, the maximum distance assigned to 2 pixels is much better to generate buffer zone. Buffer zone image was used to create an image mask. Finally the incorrect area was masked to generate the geochemical content image ( Figure 5).

Building geochemical atlas
After 39 kinds of geochemical elements (or oxide) were generated, they would be put together to form an image atlas. The method is simple, namely, using "Laystacking" command, respectively, each image was successively overlayered together.
From the view of spectroscopy, the geochemical elements need to be classified. In the periodic table of the elements, elements of the same family possess similar chemical properties, and they have similar enrichment characteristics in the earth. In accordance with the periodic table, the element family was arranged from left to right. In each family, the order was arranged from top to bottom. In this way, the order of the arranged geochemical elements was as follows: Li, Na 2 O, K 2 O, Be, MgO, CaO, Sr, Ba, Y, La, Th, U, Ti, Zr, V, Nb, Cr, Mo, W, Mn, Fe 2 O 3 , Co, Ni, Cu, Ag, Au, Zn, Cd, Hg, B, Al 2 O 3 , SiO 2 , Sn, Pb, P, As, Sb, Bi, and F.

Geochemical spectrum
In ENVI software, it is very easy to form the spectra which are constituted of the results of different geochemical elements. This paper defined these spectra as geochemical spectra, which is somewhat similar to the geochemical anomaly and the geochemical chart mentioned in geochemistry, all of which imply the content of geochemical element. All the data in the element content image are with original value, which is easy for data comparisons. If only considering the characteristic of the spectrum, methods of normalization may be adopted, namely, histogram stretching was conducted on each element content image to form the numerical range from 0 to 1, thus creating a clearer and more obvious contrast geochemical spectrum. Figure 6 shows a comparison of the spectrum of main ore deposits in the Manzhouli region. The ore deposits shown in Figure 6 are Sanhe lead-zinc deposit, Xiahulin lead-zinc deposit, Waixinhe molybdenum deposit, Babayi copper deposit, Wunugetushan copper-molybdenum deposit, Jiawula lead-zinc deposit, Chaganbulagen lead-zinc-silver deposit, and Erentaolegai silver deposit, respectively. The Geochemical Data Imaging and Application in Geoscience: Taking the Northern… DOI: http://dx.doi.org/10.5772/intechopen.84725

Image display and image enhancement
The rasterized geochemical image (Figure 7) may be carried out by image enhancement. For example, if expanding or changing the value field range of gray scale, or changing the distributional pattern of gray value, the sharpness of image may be enhanced. Some methods, e.g., direct gray transformation, histogram equalization, etc. may be adopted. And in order to make the edge of the image bright and clear, the image filtering method could be used. The image formed from geochemical data can constitute the ternary RGB image, e.g., the formed K 2 O-Na 2 O-SiO 2 image (Figure 8); it is known that K-Na-Si ingredient can be used to judge the composition of rocks.

Image statistics
Geochemical image can carry out a numerical statistics, which are somewhat different from the statistics of data of geochemical sampling sites. It is statistics of  Histogram is one of the important statistics of a geochemical image. Histogram refers to a discrete graph of probability density function of all gray values in the image, or it may be seen as a graphic expression of basic statistics of gray image. Figure 9 is based on histogram and the chiefly related statistics. Under ENVI software, the calculation results of cumulative frequency can be obtained, and classification based on histogram analysis will be introduced in the next step.
Density slices to a gray geochemical image can create element anomalies. Cumulative frequency percentage can be used to determine anomalies or anomalies grading (Figure 10).

Algebraic operations and logic operations of image
Algebraic operations of image indicate that the corresponding image pixels of two (or more than two) of input images received four arithmetic operations, which in order are addition, subtraction, multiplication, and division. The algebraic operation cannot be directly fulfilled within the vector maps, while the rasterized maps can be directly performed.
Logical operations of images are widely applied, for instance, the masking method mentioned above used logic operations to form a mask band. A specific value in a pixel could be obtained by logical operations, and then a simple classification could be generated.

Geochemical image classification
In the vector image, undoubtedly, the anomaly image of elements is one of the final products in geochemistry. The anomaly map of elements may give users vivid visual impression. Thus prospecting researchers can directly use the geochemical anomaly maps to explore the interested target. The results expressed in the rasterized image can also be fully used so as to employ the statistical method of density slicing. Figure 10 is a density sliced map which was created by histogram statistics of copper element, and its result is similar to the geochemical anomaly map. Their difference is that the final rasterized image was irregularly dentate if enlarging a small area.
What is mentioned above is the simplest classification in the rasterized geochemical image, and they were based on the sole element anomaly. Most of the time, the classification using remote sensing images is divided by supervised one and unsupervised one, and their difference is that the supervised classification  firstly gives category, whereas the unsupervised one is determined by the statistics characteristics of image data itself. The classification method used for remote images are suitable for the geochemical atlas. Usually employed methods include multilevel slice classifier, decision tree classifier, minimum distance classifier, maximum likelihood classifier, and the like (e.g., method of fuzzy theory, expert system method, etc.). SAM method mentioned later is one of the supervised classification methods.

Application of geochemical image in geology
The formed geochemical atlas can provide the prospecting target area just like conventional geochemical method and may also conduct multielement geochemical analysis. The geochemical image can accomplish the structural interpretation, e.g., linear structure and ring structure in geology just like what is fulfilled by the optical remote sensing. This paper does not restate these traditional methods but will mainly introduce the following three kinds of application in geology in the northern Daxinganling metallogenic belt.

Assisting in geological mapping
The geochemical atlas of 39 geochemical elements was generated in the northern Daxinganling metallogenic belt, including major elements and trace elements. The full use of all the elements will better assist geological mapping. Especially, in the Daxinganling Mountains, the outcrop is scarce because of the forest cover and that the field work of geological mapping encounters a great deal of difficulties. Therefore, boundaries of the geological bodies are indistinct, and the final boundaries are somehow judged by subjective experience. To employ unsupervised classification method may provide the reference for determining the boundaries of rock in the working area. As shown in Figure 11, the Chaihe area in the northern Daxinganling metallogenic belt was taken as an example; this working area belongs to stream sediment survey of the 1:200,000 Wuchagou sheet. The 39 geochemical element images are classified by K-Mean classification, and the geological interpretation map is created as the following one.
It can be seen that the geochemical mapping (Figure 12) may relatively clearly distinguish γ 5 2(2) alkali feldspar granite from monzogranite. However, the boundary is different from that in the geological map (Figure 11). In the north and south, it was verified; but in the east of the map sheet, the rock which was delineated by geochemical images (Figure 12) was not presented in the geological map (Figure 11). Other Wuchagou basalt can also be easy to identify; two signs were manifested in the north, same as the geological map. Because Baoshi formation and Fujiawazi formation are volcanic, it is sometimes difficult to classify them. As a result, the interpenetration phenomenon is frequent. In the field work, it is hard to distinguish the volcanic rocks. For example, both Fujiawazi formation and Baoshi formation contain tuff; sometimes, the difference between intermediate lava and acidic lava is weak in the field. In this case, the divided geological map is worse than the geochemical classification.

Prospecting target selection
There is plenty of research on the methods of the prospecting target selecting using data-driven and knowledge-driven modes. In the past, selecting prospecting area was primarily based on the anomaly of the major ore-forming elements. The area with high anomaly value of a single element or integrated anomalies was selected 11 The Geochemical Data Imaging and Application in Geoscience: Taking the Northern… DOI: http://dx.doi.org /10.5772/intechopen.84725 as prospecting target. Although the large area of geochemical working had been carried out, fewer researchers utilize all elements for prospecting target selecting.
Combining the characteristics of the geochemical atlas in the northern Daxinganling metallogenic belt, the geochemical spectrum method may be adopted to exhibit the similarity with the known deposits on target locating. The most frequently used method is spectral angle mapper method (SAM) [33,34]. SAM method utilize N-dimensions angle to match image elements and reference   Figure 12). spectra. The geochemical spectra were regarded as vector, whose number of dimensions is the same as the number of waveband. Then using the angle algorithm for calculating the angles' inter-element geochemical spectra, the similarity of two geochemical spectra could be determined. The geochemical spectra of Figure 13. Comparison map between the prospecting target and actual deposits in the Manzhouli region. The prospecting target was obtained by applying spectra angle method to some porphyry copper-molybdenum deposit; a is spectral angle map; b is the prospecting target formed by threshold segmentation of spectral angle map; and c is the corresponding location map between prospecting target and actual deposit. A is Wunugetushan deposit, B is Babayi deposit, and C is Badaguan deposit.

13
The Geochemical Data Imaging and Application in Geoscience: Taking the Northern… DOI: http://dx.doi.org/10.5772/intechopen.84725 locations on the known deposits are regarded as end-member spectra, and then SAM is used to compare end-member spectra with the angles of each pixel vector in N-dimensions space. The smaller angle indicates that it fits better with the geochemical spectra of the discovered deposits. This method fully utilized the information of geochemical spectra and makes every elements involved in the classification. Additionally it emphasizes the shape characteristics of the geochemical content and greatly reduces the information such as the main oreforming elements.
In this study, the geochemical spectral of the Wunugetushan copper deposit was taken as reference spectra, the SAM method was adopted, and the classification results have been verified by deposits of the same type (Figure 13).

The classification on mixed rocks
Since the late 1950s, Webb and his colleagues presented to collect fine granular sedimentary from drainages which stands for the average content of the catchment basins [35]. The subsequent regional geochemistry survey mainly based on their theory and method, namely, the sample collected, may stand for the contribution of all matters in the surrounding area of this sampling position. This is the same as to the so-called mixed spectra in remote sensing. Because large areal distributional mixed pixels evidently affect the calculation and classification of the remote sensing image, many researchers put forward the method of decomposing mixed pixels. Nowadays, methods of decomposition of mixed pixels are mainly classified into two classes, one is the linear spectral decomposition, which is based on the linear additivity of brightness of pixels, and the other is the fuzzy decomposition method.
In the process of geological mapping, the stratigraphic unit needs to be divided, and it includes various kinds of rocks. The Manitu formation on the Xiaodonggou section in the northern Daxinganling metallogenic belt served as an example. The standard strata, which were distributed between upper Baiyingaolao formation and lower Manketouebo formation, are 690.6 m thick. From bottom to top, the section involves green andesite (101.6 m), light gray andesitic-rhyolitic breccia tuff (219 m), dark gray, yellow gray andesite interlayered with debris tuff (190.3 m), and purple gray-dark andesite (179.7 m). In the fieldwork, it is difficult to observe all the rock types mentioned due to a few outcrops. As a result, the stratigraphic division can only be based on the limited artificial outcrops. Under this condition, the method of decomposing mixed pixels was used. Through decomposing the mixed pixels, the shares of various kinds of rocks can be achieved; thus it can assist stratigraphic unit classification in geological mapping.

Discuss and future prospects
In the past, regional geochemistry has made significant achievements in geology and mineral exploration. However, all of these relied on vector data, and the number of geochemical elements is limited, which narrowed the application of geochemical data. This paper only aims to supplement and modify the shortcomings of previous methods, rather than to overthrow or criticize the achievements attained by them.
The rasterized geochemical image possesses many advantages. The geochemical image is vivid for the visual interpretation. Additionally, data can be compatible for statistical analysis. That vectorized geochemical data accomplished can be achieved by the rasterized data in most cases. Furthermore, the imaged geochemical data could be processed with hyperspectral tools, which cannot be used in vector data.
The shortcoming of rasterized geochemical images mainly lies in that the raster format occupy a relative larger data storage space, and if the sampling sites is sparse, and the spatial resolution is set largely, a clear lattice shape will be displayed.
The increased geochemical density makes this kind of method to get more indepth application. No doubt geochemical survey with larger scale can provide more information. China recently carries out geological survey on main metallogenic belts, and their sampling density was bigger. The sampling density in the northern Daxinganling metallogenic belt was averagely 4-8 sites per km 2 in the scale of 1:50,000; therefore the sampling density has been greatly increased. Followed by reducing the analysis data of geochemical elements, the usual analyzed elements now are Au, Ag, Cu, Pb, Zn, As, Sb, Hg, W, Sn, Bi, Mo, and so on; the purpose is for mineral exploration. With the increase of sampling data in unit area, the spatial resolutions of geochemical image will increase. The following job is to merge 39 geochemical elements of 1:200,000 with geochemical elements in 1:50,000 to create the multielement geochemical atlas with a relative higher resolution.
Integration with other types of geoscience data is also imperative. The geological map can finally transform to a rasterized image. The strata, magmatism, and so forth may be assigned values through various kinds of logical operations in rasterized image. Regional geophysical survey, for instance, aeromagnetic, airborne gravity, geomagnetic, gravity, and regional electrical method, may form the corresponding rasterized image. These data combined with the geochemical data will undoubtedly increase the information content of geosciences; therefore, it will develop a broader approach for intensive geological study and the comprehensive application of geosciences data.

Conclusions
Regional geochemical data of 1:200,000 in the northern Daxinganling area were rasterized using a method that triangulates a planar set of points. Consequently, a multilayered image database containing 39 elements/oxides was formed. The images were enhanced using an image enhancement technique and algebraic operations. The images were handled as multidimensional vector data. Accordingly, hyperspectral tools could be used for the processing. The geochemical signatures of deposits were extracted from the images. Enriched and depleted elements were distinguished by comparing them with regional geochemical statistics. The geochemical signatures represented the geochemical characteristics of ore deposits. The rock types were classified using the K-Means method, which assisted in the regional geological mapping, especially in the areas of dense forest. The geochemical signature of a typical ore deposit was processed by SAM, which determined the similarity between the deposit and pixels in the region. The prospecting target area was determined according to the angle. With increased geochemical data sampling density, as well as further integration with other geophysical, geological, and remote sensing data, rasterized geochemical images can be fully used in the future.
© 2019 The Author(s). Licensee IntechOpen. This chapter is distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/ by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.