Fuzzy Logic and Fuzzy Expert System-Based Material Synthesis Methods

Analyzing a wide diversity of approaches to material selection and synthesis, one can observe a tendency to shift research efforts from physical experiments to systematic analysis based on mathematical models and computational schemes. The latter, in turn, evolves from traditional analytical methods and computational schemes to modern approaches that are based on collaboration of fuzzy logic and soft computing, machine learning, big data and other new methods. In this study, emphasis is put on modeling of fuzzy relationship between performance of new materials and affecting factors. This chapter includes applications of fuzzy model-based synthesis of different alloys. Fuzzy If-then rules based TiNiPt alloy synthesis problem, fuzzy expert system based synthesis of material for pressure vessel and other problems are considered.


Introduction
Development of new materials is one of important tasks of theoretical and practical interest.Traditionally, this task is implemented mainly on the basis of intensive (and sometimes "ad hoc") experiments which are time-and resource consuming or even not practically implementable.Nowadays, it is well understood that more systematic and effective approaches are needed which are based on computer-guided synthesis of materials.Such approaches rely on data-driven mathematical models and knowledge base obtained from big data previously collected during intensive experiments.Existing computational approaches include methods based on phase diagrams, simulation modeling, theory of associated solutions, methods of microstructure modeling, random fields, etc.In [1], authors analyze the way data-driven techniques are used in deciphering processingstructure-property-performance relationships in materials, with examples of forward (property prediction) and inverse (materials discovery) models.Such analysis can noticeably improve cost-effective materials discovery as the aim of Materials Genome Initiative (MGI).It is shown that adding data sciences to the paradigms of materials science is important to deal with big data.
Agrawal et al. [2] used the Japan National Institute for Materials Science (NIMS) MatNavi database [3] to develop models for prediction of fatigue strength of steel.Prediction accuracy is important for a number of applications due to the significant complexity of fatigue testing and serious consequences of its failures.Actually, fatigue usually leads to more than 90% of all mechanical failures of structural components [4].
In [5], the authors processed the materials properties database for selecting and designing high-temperature alloys for solid oxide fuel cell (or SOFC) applications.Also, this work considers the selection of alloy compositions and properties, which are relevant to the SOFC application.The alloys of interest included such hightemperature alloys as Co, Ni, and Fe base superalloys, as well as stainless steels and Cr base alloys.
The fusion of clustering and regression methods with optimization approaches provides a new opportunity for materials discovery and design.In [6], they discuss the challenges and opportunities associated with materials research.The work [7] for the first time represents machine learning-based determination of viable new compound from true chemical white space, whereas no characterization was provided by promising chemistries.The authors consider an effective prediction model for materials properties that may be easily accessible and useful for researchers.
Existing works based on classical computational schemes used for material synthesis and selection provided good results.However, one important issue related to big data-based computerized material synthesis is that experimental data include measurement errors, partially reliable information, imprecise evaluations, etc.This mandates the use of fuzzy logic approaches for material synthesis.Let us consider some existing works in this regard.
Papers [8][9][10] show the necessity to account for nonlinearity and uncertainty factors that characterize modeling of material design problems.This requires searching for new ways in formalization of systematic approaches to material design.These papers are devoted to these factors.
Authors in [11] used a new combining tool with which it is possible to model and optimize new alloys that simultaneously satisfy up to 11 physical criteria.To develop a new polycrystalline nickel-base superalloy with the optimal combination of cost, density, gamma-primary phase and sol content, phase stability, durability, yield point, tensile strength, stress rupture, oxidation resistance, and elongation.
In [12], they have developed a rule-based fuzzy logic model for predicting shear strength of Ni-Ti alloy specimens which were produced using powder metallurgy method.
In [13], they applied the fuzzy set theory to knowledge mining from big data on material characteristics.The authors propose fuzzy clustering-generated If-Then rules as a basis for computer synthesis of new materials.These fuzzy If-Then rules describe relationship between material composition and material properties.Validity of the proposed approach is verified on an example of prediction properties of Ti-Ni alloy, and computer experiments of the proposed fuzzy model show its better performance than the physical experiment-based analysis.
In [14], ANFIS model is used to describe the high-temperature deformation behavior of Ni-based superalloy.The inputs of the ANFIS model are deformation temperature, strain rate, and true strain, and the output is true stress.The optimal numbers and types of membership function for the input variables are found.The results show that the constructed ANFIS model is effective in predicting the considered behavior of the Ni-based superalloy.
In this chapter, we propose fuzzy If-Then rule-based model to predict properties of new materials.The model is constructed on the basis of fuzzy clustering of big data on dependence between material composition and related properties.The motivation to use fuzzy model is inspired by the necessity to construct an intuitively well-interpretable development strategy from imperfect and complex data.The proposed approach is applied to synthesis of Ti-Ni-X alloys with required properties and synthesis of material for pressure vessel.Computer experiments of the proposed fuzzy models show better performance than the physical experimentbased analysis.

Statement of material synthesis problem and solution methods
The motivation to use fuzzy model is inspired by the necessity to construct an intuitively well-interpretable development strategy from imperfect and complex data.Analyzing a wide diversity of approaches to material selection and synthesis, one can observe a tendency to shift research efforts from physical experiments to systematic analysis based on mathematical models and computational schemes.The latter, in turn, evolutes from traditional analytical methods and computational schemes to modern approaches that are based on collaboration of fuzzy logic and soft computing, machine learning, big data, and other new methods.Uncertainty of materials properties requires to use fuzzy logic methods to more adequately model and predict possible material behavior.This will help to deal with imprecision of experimental data; partial reliability of experimental data, prediction results, and expert opinions; uncertainty of materials properties stemming from complex relationship between material components; and a necessity to analyze, summarize, and reason with a large amount of information of various types (numeric data, linguistic information, graphical information, geometric information, etc.).
Fuzzy logic methods have a good capability to effectively capture and process imprecise experimental data, that is, interpret, classify, learn, and compute with them.Fuzzy logic may help to improve abilities of big data principles to deal with a huge amount and variety of information.In this realm, fuzzy clustering and fuzzy logic-based knowledge bases and information search algorithms provide a bridge between complexity, imperfectness, qualitative nature of information, and research techniques.Particularly, this may help to get intuitive general interpretation of materials science results obtained by various techniques, and ways to get practical results would be then more evident.
Assume that big data on smart materials sourced from experiments is available.These big data describe relationship between alloy composition and its characteristics (Table 1) [13, 15,16].
The problem is to extract knowledge-based model from the considered data and to find an alloy composition which provides a predefined alloy characteristics.We will consider fuzzy knowledge-based synthesis model [17][18][19][20].The problem is solved as follows [21].
First, fuzzy clustering of the big data is applied to determine fuzzy clusters IF y 1 is A k1 and,…, and y n is A kn THEN z 1 is B k1 and,…, Big data of relationship between alloy composition and its characteristics.
Third, fuzzy inference is implemented on the basis of the fuzzy IF-THEN rules to compute optimal values B 0 1 ,…,B 0 m of alloy characteristics z 1 , …, z m .The fuzzy inference is mainly based on composition of a fuzzy input information on material constituents (and other conditions) and fuzzy relation which describes fuzzy IF-THEN rules.A different approach to fuzzy reasoning also exists and is applied in case of scarce rule base.This is based on fuzzy inference by using similarity of fuzzy input information and antecedents of existing fuzzy rules; a resulting output is then computed as linear interpolation of fuzzy rule consequents.
By using fuzzy inference, optimal values B 0 1 ,…,B 0 m are found as those closed to the ideal vector of characteristics For material synthesis, also fuzzy expert system approach is used.In this case, fuzzy expert system ESPLAN implements IF-THEN rule base obtained from fuzzy clustering of data.
The use of fuzzy rules and fuzzy inference provides us important tools for transition from intensive experiments which deal with a physical model to a fuzzy logic-based mathematical model.Further experiments are conducted not by using physical model but by using fuzzy logic-based mathematical model.

Material synthesis of Ti-Ni-X alloys by using ideal vector of characteristics 3.1 Synthesis of Ti-Ni-Pd alloys with given characteristics
A problem of computational synthesis of Ti-Ni-Pd alloy with predefined characteristics is considered.A big data fragment describing dependence alloy composition and the corresponding characteristics is shown in Table 2.
A problem of computational synthesis is related to determination of alloy composition with corresponding values of the characteristics close to the target values: In order to describe relationship between alloy composition and the characteristics values, the fuzzy IF-THEN rules were obtained by using FCM clustering of the considered big data:  3 and 4.
The linguistic approximation of the inputs is shown in Tables 5 and 6.
The codebooks for the outputs are shown in Tables 7-10.

Fuzzy Logic
No.
A big data fragment on Ti-Ni-Pd alloy composition [22].
Fuzzy Logic and Fuzzy Expert System-Based Material Synthesis Methods DOI: http://dx.doi.org/10.5772/intechopen.84493 The constructed fuzzy model will be used to determine an input vector We have found that the fuzzy optimal output vector B 0 induced by the fuzzy input vector A 0 ¼ A 0 1 ; A 0 2 ; A  Table 9.

Linguistic terms for output 3 (As).
Fuzzy Logic the computational synthesis based on the fuzzy model uncovers the following alloy composition: Ni is about 19%, Ti is about 51%, and Pd is about 30% with the characteristics M f = 347.78,about M s = 364.86,about A f = 382.17,and A s = 375.22.

Synthesis of Ti-Ni-Pt alloys with given characteristics
A problem of computational synthesis of Ti-Ni-Pt alloy with predefined characteristics is considered.A big data fragment describing dependence alloy composition and the corresponding characteristics is shown in Table 11.
The following fuzzy IF-THEN rules were obtained by using FCM clustering of the considered big data: If  The codebooks for inputs are shown in Tables 12 and 13.
The linguistic approximation of the inputs is shown in Tables 14 and 15.
The codebooks for the used outputs are shown in Tables 16 and 17.
We have found that the fuzzy optimal output vector B 0 induced by the fuzzy input vector A 0 ¼ A 0 1 ; A 0 2 ; A

Material synthesis by fuzzy expert system
A series of works exist on material synthesis by using fuzzy models [12,24,25].In this study, to solve material synthesis problem for pressure vessel, two methods are used: possibility measure-based inference method (by ESPLAN shell, Aliev inference) and Mamdani inference method (by MATLAB environment, Fuzzy Toolbox) [26].

Statement of the problem
Defining the performance index for pressure vessel in material synthesis is a very important problem.The basic problem is to evaluate the performance index by using weighted performance indices.
For determining the performance index, we use data of alloys.There are many types of alloys.
The weighted performance index denoted Out is a compound index built from four characteristics each of which is extracted from the data set.The four characteristics are in1-scaled PREN, in2-scaled yield strength, in3-scaled weldability, and in4-scaled impact strength.
Using the abovementioned parameters, the performance index model can be expressed as.
IF x 1 is A 11 and …..
where x j ¼ j 1…n are the linguistic input variables, y is the output variable, and A ij and B i are the fuzzy sets, n = 4, m = 7.
Fragment of data set is given in Table 18.

Modeling of material data by fuzzy C-means clustering
To create this model, we use clustering approach, mainly fuzzy C-means.Data set contains 35 records extracted from big data.For modeling we use two-thirds of the given data and testing one-third.Inputs: x1, scaled PREN; x2, scaled yield; x3, scaled weldability; x4, scaled impact strength.Output: y, performance index.For simulation FCM-based clustering initial data are: No.
Linguistic value TFN  Min.improvement = 0.000001.Obtained centers of the clusters are given in Table 19.Each row describes a cluster center as five-dimensional vector with coordinates x1 (scaled PREN), x2 (scaled yield), x3 (scaled weldability), x4 (scaled impact strength), and y (performance index).Columns describe the values of the coordinates of the cluster centers.
Representation of the extracted fuzzy rules from big data by using fuzzy c-means method fragment is given below and in Figure 1.Graphical representation of the linguistic terms of inputs and outputs of the rules as trapezoidal fuzzy numbers is given in Figures 2-6.EXPERT system shell ESPLAN's result is "Performance index is about 46.5" (alloy Monel-400).
The fuzzy rules were derived from alloy big data by using FCM method, and fuzzy inference within these rules is implemented in expert system shell ESPLAN.The obtained results confirm efficiency of the proposed approach.
Solution by using Mamdani inference method.General form of the abovementioned rules are as form (4.13).Mamdani fuzzy inference is most commonly used approximate reasoning methodology for fuzzy modeling.The method  For these values, the defuzzified output is Out = 50.3.This result fits the performance index of alloy 317LM.
Consider also the following input values: In1 = 26, In2 = 3.6, In3 = 18.4,and In4 = 6.8.The computed output (performance index) is 54.7.The performance index computed for the third case and the performance index from big data set are shown in Table 21.
Deviation between testing and expert data is 0.18% or 0.0018.Summarizing the findings in this chapter, we have to conclude that the discovery and design of new materials are driving forces for much of the research that takes place in multiple disciplines, including materials science and engineering, matter physics, materials chemistry, and emerging technologies such as fuzzy logic, soft computing, etc.However, this task is implemented mainly on the basis of timeand resource-consuming experiments.Thus, we consider to shift the approaches to material design investigations from physical experiments to experiments on the basis of fuzzy If-Then rule-based material model.The motivation to use fuzzy model is inspired by the necessity to construct an intuitively well-interpretable material design model based on imperfect and complex data.In this chapter we have considered three material synthesis problems which had shown that instead of carrying out complicated experiments, researchers can use fuzzy model-based computational synthesis approach utilizing digital twins of physical models.Applications of this approach have shown that fuzzy model-based experiments can give better results than physical experiments in terms of desirable characteristics of synthesized materials.The approaches suggested in this chapter are universal and may be applied not only in materials science but also in chemical engineering, drug design, and other fields.Complexity of material design problems mandates to combine fuzzy logic and efficient learning methods as artificial neural networks, evolutionary algorithms, and others to more adequately model and predict possible material behavior.

Conclusion
In this chapter, we have used data-driven approach to construction of fuzzy model which is more effective than expert-driven approach.Consequently, we have used fuzzy C-means clustering to derive fuzzy If-Then rules from material data that describe material composition and related characteristics.In order to determine the required characteristics, computational experiments on the basis of fuzzy inference and fuzzy expert system were conducted.The expert opinions and some few physical experiments have proven validity of the obtained results.The main advantage of the fuzzy logic-based approach is a high interpretability of fuzzy If-Then rules.However, learning the ability of the fuzzy models is scarce.Thus, combination of fuzzy logic with deep learning methods, mainly, reinforcement learning methods, would help to achieve better results on material synthesis.
In future works, fuzzy materials paradigm may improve processing-structure-property-performance relationship in hierarchy of structural materials levels, from the atomic and electronic to the macrostructural levels.Another important application of fuzzy logic is fuzzy phase diagram construction for different alloy models using uncertain enthalpies and other thermodynamic parameters will be investigated, which opens a door to design new materials.

1 . 2 .
IF Scaled PREN = about 18 and Scaled yield = about 3 and Scaled weldability = about 14.5 and scaled impact strength = about 10.8, THEN Performance index = about 46.5.IF Scaled PREN = about 27 and Scaled yield = about 4.4 and Scaled weldability = about 21 and scaled impact strength = about 12 THEN Performance index = about 65.

Fuzzy Logic 3 . 5 . 6 .
IF Scaled PREN = about 26 and Scaled yield = about 5 and Scaled weldability = about 4.8 and scaled impact strength = about 3 THEN Performance index = about 38.5.4.IF Scaled PREN = about 21 and Scaled yield = about 9 and Scaled weldability = about 21.2 and scaled impact strength = about 5 THEN Performance index = about 55. IF Scaled PREN = about 25 and Scaled yield = about 3.6 and Scaled weldability = about 19 and scaled impact strength = about 6 THEN Performance index = about 53.5.IF Scaled PREN = about 47 and Scaled yield = about 4.5 and Scaled weldability = about 18 and scaled impact strength = about 13 THEN Performance index = about 83.

7 .
IF Scaled PREN = about 24 and Scaled yield = about 6 and Scaled weldability = about 14 and scaled impact strength = about 10 THEN Performance index = about 54.

Figure 3 .
Figure 3. Linguistic terms of input 2 or scaled yield strength.

Figure 6 .
Figure 6.Linguistic terms of outputs or performance index.

Figure 5 .
Figure 5. Linguistic terms of input 4 or scaled impact strength.

Table 10 .
x 1 is VL and x 3 is VH THEN y 1 is VH and y 2 is VH.If x 1 is H2 and x 3 is L1 THEN y 1 is VL and y 2 is VL.If x 1 is A and x 3 is L3 THEN y 1 is L2 and y 2 is L2.If x 1 is L and x 3 is H THEN y 1 is H and y 2 is H.If x 1 is H1 and x 3 is L2 THEN y 1 is L1 and y 2 is L. Linguistic terms for output 4 (Af).
* ðÞ ¼ 164.The fuzzy model-based results show that the

Table 18 .
Fragment of data set (extracted from big data).

Table 19 .
Centers of the clusters.

Table 21 .
Comparison of computed and given data.